User Guide

40
The last two controls in this area are as follows:
• Master:
This is an overall master level control for all of the buses together. In the master
output plugin (BFD Stereo) this will control the overall level of the stereo channel.
In the multi-channel versions of the plugin (BFD Groups and BFD All), it controls
the relative volume of all separate outputs.
• Master Dynamics:
This is a global control over velocity sensitivity. Its value (ranging from -127 to
127) is added to the velocity of all incoming notes (from either normal MIDI input
or from the Groove Librarian), after the individual Kit-Piece dynamic values have
been added.
note: this is unlabelled on the interface - it is located just above the Master fader.
The mixer section contains a preset system, which allows very quick access to dif-
ferent mixer settings.
• Save Mixer Preset
Brings up a standard file browser in order to save your mixer setups. By
default, the BFD/Mixers folder is used.
• Load Mixer Preset
Brings up a standard file browser, allowing you to load a mixer setup file
from any location.
• Quick-access Preset Browser
If you save your mixer setups into the BFD/Mixers folder, you can
use these quick access buttons in order to quickly flick between the various
setups stored in the folder.
• Reset Mixer Section
Resets the mixer section to default settings.