Owner's Manual

8 9
Cocking and Loading
With the rifle pressurized and magazine loaded, continue to prepare the rifle
for use by pulling rearward on the cocking lever until it clicks in the rearward
position.
Then set the safety to its safe position.
Carefully insert the magazine in the magazine slot, ensuring the pellets face the
correct direction.
Press firmly to ensure the magazine is completely installed. Closing the cocking
lever will now load a pellet into the barrel and make the rifle cocked and loaded.
Switching the safety to “FIRE” will make the rifle ready to fire.
Be sure to keep the rifle pointed in a safe direction throughout this entire procedure.
Uncocking the rifle/inactivating trigger system
Pull the cocking lever to its rear position, put the safety to Fire.
While holding the cocking lever in its rear position you squeeze the trigger and
at the same time you gently move the cocking lever forward. Trigger must be
pulled throughout the whole procedure.