SDS

Date of issue/Date of revision : 05/21/2015 Version : 1 5

Section 8. Exposure controls/personal protection

Body protection : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.

Section 9. Physical and chemical properties

Appearance
Physical state
Color
Odor
Odor threshold
pH
Melting point
: Liquid.
: Clear. Red.
: Not available.
:
Not available.
:
Not available.
: Not available.
Boiling point : Not available.
Flash point
Evaporation rate
: Open cup: >93.33°C (>200°F)
: Not available.
Flammability (solid, gas) : Not available.
Lower and upper explosive
(flammable) limits
Vapor pressure
Vapor density
Relative density
Solubility
Partition coefficient: n-
octanol/water
Auto-ignition temperature
: Not available.


: Not available.
:
Not available.
: 0.8787
: Insoluble in the following materials: cold water and hot water.
: Not available.


: Not available.
Decomposition temperature : Not available.
Viscosity : Kinematic (40°C (104°F)): 0.5809 cm
2
/s (58.09 cSt)

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.


Chemical stability : The product is stable.


Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.


Conditions to avoid : No specific data.


Incompatible materials : No specific data.