SDS

Date of issue/Date of revision
: **
*
Date of previous issue : 9/22/201
7
Version : ***
2 /11
FVP High Temp Grease
Section 3. Composition/information on ingredients
Ingredient name % CAS number
Distillates (petroleum), hydrotreated heavy naphthenic ≥50 - ≤75 64742-52-5
Distillates (petroleum), hydrotreated heavy paraffinic ≥10 - ≤25 64742-54-7
Residual oils (petroleum), solvent-dewaxed ≥10 - ≤25 64742-62-7
Lithium, 12-hydroxyoctadecanoate sebacate complexes ≤10 68815-49-6
Any concentration shown as a range is to protect confidentiality or is due to process variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Occupational exposure limits, if available, are listed in Section 8.
Description of necessary first aid measures
Eye contact
Inhalation
Skin contact
: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention if irritation occurs.
: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If
not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial
respiration or oxygen by trained personnel. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects
persist or are severe. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar,
tie, belt or waistband.
: Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean
shoes thoroughly before reuse.
Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. Do not induce vomiting unless
directed to do so by medical personnel. If vomiting occurs, the head should be kept low
so that vomit does not enter the lungs. Get medical attention if adverse health effects
persist or are severe. Never give anything by mouth to an unconscious person. If
unconscious, place in recovery position and get medical attention immediately. Maintain
an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Most important symptoms/effects, acute and delayed
Potential acute health effects
Eye contact : No known significant effects or critical hazards.
Inhalation : No known significant effects or critical hazards.
Skin contact : Injection of pressurized hydrocarbons can cause severe permanent tissue damage.
Initial symptoms may be minor.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation
Skin contact
Ingestion
: No specific data.
: No specific data.
: No specific data.
Indication of immediate medical attention and special treatment needed, if necessary
Notes to physician : In the event of injection in underlying tissue, immediate treatment should include
extensive incision, debridement and saline irrigation. Inadequate treatment can result in
ischemia and gangrene. Early symptoms may be minimal.
Specific treatments : Treat symptomatically and supportively.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Section 4. First aid measures