SDS

FVP SILICONE LUBRIC
A
NT 10 OZ.
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/02/2015 EN (English US) 3/12



Unsuitable extinguishing media : Do not use a heavy water stream.

5.2. Special hazards arising from the substance or mixture
Fire hazard : Extremely flammable aerosol.
Explosion hazard : Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns
and injuries.

5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment. DO NOT fight fire when fire
reaches explosives. Evacuate area.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
Other information : Aerosol level 3.

SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : No open flames. No smoking. Isolate from fire, if possible, without unnecessary risk. Remove
ignition sources. Use special care to avoid static electric charges.

6.1.1. For non-emergency personnel
Protective equipment : Gloves. Safety glasses.
Emergency procedures : Evacuate unnecessary personnel.

6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection. Avoid breathing dust,fume,gas,mist,vapor spray.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.

6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers. Plug the leak,
cut off the supply.
Methods for cleaning up : Store away from other materials.

6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.

SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Hazardous waste due to potential risk of explosion. Pressurized container: Do not pierce or burn,
even after use.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapor. Do not spray on an open flame or other ignition source. Obtain special instructions . Do
not handle until all safety precautions have been read and understood. Avoid breathing
dust,fume,gas,mist,vapor spray. Use only outdoors or in a well-ventilated area.
Hygiene measures : Do not eat, drink or smoke when using this product. Wash contaminated clothing before reuse.
Wash affected areas thoroughly after handling. Wash hands and other exposed areas with mild
soap and water before eating, drinking or smoking and when leaving work.

7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Do not expose to
temperatures exceeding 50 °C/ 122 °F. Keep in fireproof place. Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
Heat-ignition : KEEP SUBSTANCE AWAY FROM: heat sources. ignition sources.
Storage area : Store in a well-ventilated place.
7.3. Specific end use(s)
Follow Label Directions.

SECTION 8: Exposure controls/personal protection
8.1. Control parameters

Benzene (71-43-2)
USA ACGIH ACGIH TWA (ppm) 1 ppm