SDS

FVP CARBURETOR & FUEL INJECTOR CLEANER 12 FL.OZ.
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
21/12/2016 EN (English US) 9/9
Naphtha, Hydrotreated Heavy (64742-48-9)
No No No No
Ethylbenzene (100-41-4)
State or local regulations
U.S. - Pennsylvania - RTK (Right to Know) List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - California - Proposition 65
SECTION 16: Other information
Other information : None.
Full text of H-phrases:
------ H225 Highly flammable liquid and vapor
------ H226 Flammable liquid and vapor
------ H227 Combustible liquid
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H332 Harmful if inhaled
------ H351 Suspected of causing cancer
------ H373 May cause damage to organs through prolonged or repeated
exposure
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 2 - Must be moderately heated or exposed to relatively high
temperature before ignition can occur.
NFPA reactivity : 0 - Normally stable, even under fire exposure conditions,
and are not reactive with water.
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 2 Moderate Hazard
Physical : 0 Minimal Hazard
Personal Protection : B
SDS US (GHS HazCom 2012) - TCC
The Supplier identified in Section 1 of this MSDS has evaluated this product and certifies it to be labeled and packaged in compliance with the applicable provisions of the Federal Hazardous
Substance Act as stated in 16 CFR 1500 and enforced by the Consumer Product Safety Commission, and where applicable the products that require Child Resistant Closures are packaged in
accordance with the Poison Prevention Packaging Act as stated in 16 CFR 1700 and enforced by the Consumer Product Safety Commission. All closures have been tested in accordance with the
latest protocols. No other testing is required to certify compliance with the above. The date of manufacture is stamped on the product
Disclaimer: The information and recommendations contained herein are based upon tests believed to be reliable. However, the manufacturer/distributor of this product does not guarantee their
accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE A WARRANTY, WHETHER EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOODS, THE
MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE GOODS FOR A PARTICULAR PURPOSE. Adjustment to conform to actual conditions of usage may be required. The
manufacturer/distributor assumes no responsibility for results obtained or for incidental or consequential damages, including lost profits, arising from the use of these data. No warranty against
infringement of any patent, copyright or trademark is made or implied.