SDS

FVP BRAKE CLEANER 16 OZ.
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
21/12/2016 EN (English US) 3/9
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers. Plug the
leak, cut off the supply.
Methods for cleaning up : Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. Use only outdoors or in a well-ventilated area. Avoid breathing
dust,fume,gas,mist,vapor spray. Obtain special instructions . Do not handle until all safety
precautions have been read and understood.
Hygiene measures : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Do not eat, drink or smoke when using this product. Wash
affected areas thoroughly after handling. Wash contaminated clothing before reuse. Always
wash hands after handling the product. Remove contaminated clothes. Separate working
clothes from town clothes. Launder separately.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Comply with
applicable regulations.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep container
closed when not in use.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.
Storage area : Store in a well-ventilated place.
7.3. Specific end use(s)
Follow Label Directions.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Tetrachloroethylene (127-18-4)
USA ACGIH ACGIH TWA (mg/m³) 170 mg/m³
USA ACGIH ACGIH TWA (ppm) 25 ppm (Tetrachloroethylene (Perchloroethylene);
USA; Time-weighted average exposure limit 8 h; TLV -
Adopted Value)
USA ACGIH ACGIH STEL (mg/m³) 685 mg/m³
USA ACGIH ACGIH STEL (ppm) 100 ppm
USA OSHA OSHA PEL (TWA) (ppm) 100 ppm
USA OSHA OSHA PEL (Ceiling) (ppm) 200 ppm
Carbon Dioxide, Liquefied, Under Pressure (124-38-9)
USA ACGIH ACGIH TWA (mg/m³) 9000 mg/m³
USA ACGIH ACGIH TWA (ppm) 5000 ppm (Carbon dioxide; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
USA ACGIH ACGIH STEL (mg/m³) 54000
USA ACGIH ACGIH STEL (ppm) 30000 ppm
USA OSHA OSHA PEL (TWA) (mg/m³) 9000 mg/m³
USA OSHA OSHA PEL (TWA) (ppm) 5000 ppm
8.2. Exposure controls
Appropriate engineering controls : Local exhaust venilation, vent hoods . Ensure good ventilation of the work station.
Personal protective equipment : Gloves. Safety glasses. Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.