SDS

Safety Data Sheet
FVP DOT 3 BF 12/12OZ Page 2 of
2
HMIS Ratings: NFPA Ratings:
Health:
2
Health:
2
Fire:
1
Fire:
1
Reactivity:
0
R
eactivit
y
:
0
PPE:
B
KEY: 0 - Least 1 - Slight 2 - Moderate 3 - High 4 – Extreme
III. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name % CAS # OSHA Exposure Limits
Ethanol, 2-(2-(2-ethoxyethoxy)ethoxy)- 10 - 30 112-50-5 No PEL
Polyethylene glycol methyl ether 10 - 30 9004-74-4 No PEL
Pentaethylene glycol 10 - 30 4792-15-8 No PEL
Ethanol, 2-(2-(2-methoxyethoxy)ethoxy)- 5 - 10 112-35-6 No PEL
Ethanol, 2-(2-(2-butoxyethoxy)ethoxy)- 5 - 10 143-22-6 No PEL
Polyethylenglykolmonobutylether 1 - 5 9004-77-7 No PEL
Hexaethylene glycol 0.1 - 1 2615-15-8 No PEL
3,6,9,12-tetraoxatetradecan-1-ol 0.1 - 1 5650-20-4 No PEL
Polyethylene glycol 0.1 - 1 25322-68-3 No PEL
Tetraethylene glycol 0.1 - 1 112-60-7 No PEL
Triethylene glycol 0.1 - 1 112-27-6 No PEL
Diethylene glycol 0.1 - 1 111-46-6 No PEL
Ethanol, 2-(2-butoxyethoxy)- 0.1 - 1 112-34-5 No PEL
Trisodium phosphate 0.1 - 1 7601-54-9 No PEL
Sodium dihydrogen phosphate 0.1 - 1 7558-80-7 No PEL
Phosphoric acid, monopotassium salt 0.1 - 1 7778-77-0 No PEL
2-Propanol, 1,1''-iminodi- 0.1 - 1 110-97-4 No PEL
Components not listed are not physical or health hazards as defined in 29 CFR 1910.1200 (Hazard Communication
Standard).
IV. FIRST-AID MEASURES
Inhalation:
Remove to fresh air. If breathing is difficult, have a trained individual administer
oxygen.
Eyes:
Flush with water. If irritation occurs, get medical attention. Rest eyes for 30 minutes.
If redness, burning, blurred vision, or swelling occurs, transport to nearest medical
facility for additional treatment.
Skin Contact:
Wash with soap and water.
Ingestion:
Do not induce vomiting and seek medical attention immediately. Provide medical care
provider with this MSDS. Contains a harmful substance. Seek medical help
immediately and contact a poison information service. Drink two glasses of water or
milk to dilute.
Notes to Doctor:
No additional first aid information available.
V. FIRE FIGHTING MEASURES
Flammability
Summary:
Combustible at elevated temperatures
Extinguishing Media:
Use alcohol resistant foam, carbon dioxide, or dry chemical when fighting fires. Water
or foam may cause frothing if liquid is burning but it still may be a useful extinguishing
agent if carefully applied to the surface of the fire. Do not direct a stream of water into
the hot burning liquid.
Fire and/or Explosion
Hazards:
Material may be ignited only if preheated to temperatures above the high flash point, for
example in a fire.
Fire Fighting Methods
and Protection:
Do not enter fire area without proper protection including self- contained breathing
apparatus and full protective equipment. Use methods for the surrounding fire.