SDS

MATERIAL SAFETY DATA SHEET
Trade Name:
FVP Foaming Engine Degreaser
MSDS NO.
FVPED-14.5
Revision Date:
Date Printed
14-12-2012
Page 2 of 4
5. FIRE FIGHTING MEASURES
Flash Point °F(°C):
-200 F (-128.9 C) (Propellant)
Flash Point Method:
TAG Closed Cup
Flammable Limits in Air - Lower (%):
Not determined
Flammable Limits in Air - Upper (%):
Not Determined
Autoignition Temperature °F(°C):
460 F (237.8 C) (Lowest Component)
Extinguishing Media:
Dry chemical. Carbon dioxide. Use water spray to keep containers cool that are exposed to heat or flames.
Foam.
Protection Of Fire-Fighters:
Special Fire-Fighting Procedures:
Wear approved positive-pressure self-contained breathing apparatus and protective clothing. Vapor may
cause flash fire.
Hazardous Combustion Products:
Carbon Dioxide. Carbon Monoxide.
Aerosol Comments:
NFPA Level 1 Aerosol
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Wear appropriate protective clothing and equipment to prevent skin and eye contact.
Spill Procedures:
Contain any liquid from leaking containers. Avoid all sources of ignition; heat, sparks and open flames.
Action to be taken if material is released
or spilled:
Do not puncture or incinerate container. Contents under pressure. Wear proper protective equipment as
specified in the protective equipment section. Remove sources of ignition. Leaking containers should be
removed to an isolated, well-ventilated area and transferred to other suitable containers. Wipe, scrape, or
soak up in an inert material and put in a container intended for flammable materials for disposal.
Environmental Precautions:
Do not allow to enter sanitary drains, sewer or surface and subsurface waters. Keep out of lakes, ponds or
streams.
7. HANDLING AND STORAGE
Handling and Storage:
Caution: Contents under pressure. Keep away from heat and open flame. Use only in a well ventilated
area. Avoid breathing vapors, if exposed to high vapor concentration, leave area at once. Avoid contact
with skin and eyes. Do not puncture, incinerate or store above 120 F. Exposure to high temperatures may
cause bursting. DO NOT store in the passenger compartment of an automobile.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:
Use in a well ventilated area. Local exhaust ventilation as necessary to maintain exposures to within
applicable limits.
Eyes:
Chemical goggles; also wear a face shield if splashing hazard exists.
Skin Protection:
Avoid skin contact. Wear protective clothing and gloves.
Respiratory Protection:
Do not breath mist or vapor. Use in a well ventilated area. Appropriate respiratory
protection shall be worn
when applied engineering controls are not adequate to protect against inhalation exposure.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Colorless to light yellow liquid
Odor:
SLIGHT ALCOHOL
pH Value:
9.0
Vapor Pressure:
Not Determined
Vapor Density (Air=1):
Not Determined
Boiling Point (°F):
Not Determined
Melting/Freezing Point:
Not Determined.
Solubility in Water:
Solubility in Water:
Bulk Density at 20°C:
Not Determined
Molecular Weight:
Mixture
Specific Gravity (H20=1):
.98 @ 60 F (liquid)
Viscosity:
Not Determined.
Evaporation Rate:
Not Determined
VOC Content(%):
Not determined.
Decomposition Temperature:
Not Determined