User's Manual
Table Of Contents
- Contents
- 1Introduction
- 2Instructions on the E3PDA
- 3Call Function
- 4.Network and Connection Synchronization
- 5.Introduction to iScan of the E3PDA
- 6Managing E3PDA
- 7Precautions and Troubleshooting
E3PDA User Manual
- 5 -
1.6
Charging
Figure 1-6 Disassembling the battery cover
You can charge the E3PDA in the following ways:
1.
Charge the E3PDA by using bottom charging cable.
2.
Connect the E3PDA to a PC by using a USB cable to charge the E3PDA.
In the charging status, the LED is red. When the LED becomes blue, charging is complete.
When the battery volume is insufficient, the E3PDA displays alarm information.
When the battery volume is too low, the E3PDA is automatically powered off.
★ Caution
The battery can be charged for more than or less than three hours. The battery will not be
damaged if charging is interrupted. The duration of the battery depends on different
applications of the E3PDA, for example, selected functions of E3PDA, usage mode, and
data transmission.
★ Tips
To ensure a longer standby time of the E3PDA, follow the following tips:
Always connect the E3PDA to the AC power supply when you do not useit.
In settings, set the time to sleep to a smaller value for the E3PDA by selecting Home>
Applications > Settings > Display > Screen Delay.
Stop all wireless activities when you do not use the E3PDA.