User's Manual

E3PDA User Manual
- 25 -
 Do not put the battery into a fire.
 If the battery leaks, do not let the liquid stain your skin or eyes. Otherwise, wash your
skin or eyes with lots of water and go to see the doctor immediately.
Cleaning the E3PDA
 Shell
Clean the shell by using a cloth soaked with alcohol, including keys and space between
keys.
 Display
You can clean the display screen by using a cloth soaked with alcohol. Do not let the
liquid gather around the screen. Otherwise, dry the screen by using a soft non-woven
cloth in case strip marks are left on the screen.
 Scan lens
Clean the scan lens regularly by using lens paper or other articles suitable for cleaning
optical materials.
7.2 Troubleshooting
Table 7-1 E3PDA troubleshooting
Fault
Cause
Solution
After the power key is
pressed, the E3PDA is
not powered on.
The battery volume is too
low or the battery is not
charged.
Charge the E3PDA or replace the battery.
The battery
installed.
is
incorrectly
Correctly install the battery.
The system breaks down.
Restore factory settings.
Battery charging fails.
The battery fails.
Replace the battery.
The temperature of the
battery is too high or low.
Put the battery in normal temperature.
During data
communication, data is
not transmitted or
transmitted data is
incomplete.
The cable configuration is
incorrect.
Consult the system administrator.
The communication
software is incorrectly
installed or configured.
Install or reinstall the ActiveSync software to
update the driver.
The relevant function is
not activated after a user
clicks a button or icon.
The system
respond.
does not
Restart the system.
No sound can be heard.
The volume is too low or is
disabled.
Adjust the volume.
The E3PDA is closed.
The E3PDA
inactive state.
is in the
After being inactive for a period of time, the
E3PDA is closed.
The battery is used up.
Replace the battery.
The E3PDA responds
Too many files are stored in
Remove unused memos and records.
If