User's Manual
Table Of Contents
- Contents
- 1Introduction
- 2Instructions on the E3PDA
- 3Call Function
- 4.Network and Connection Synchronization
- 5.Introduction to iScan of the E3PDA
- 6Managing E3PDA
- 7Precautions and Troubleshooting
E3PDA User Manual
- 16 -
4.
Network and Connection Synchronization
4.1
Data Connection
By default, the network is configured for the device upon delivery. If you delete the network
configuration by mistake, you can manually select a network through software configuration.
In hardware, different antennas are used in two network modes. In software, you need to
perform the following configuration: Select Settings > More > Mobile Networks >
Network Mode and manually select the CDMA or GSM network.
Select one of the options in the figure accor
ding to actual conditions.