Installation Instructions

Step
In the case of inductive malfunctions and
operational errors, such as water shortage in
the bucket, water supply exceeding 2 cm, the
system will stop and alarm with a flashing light.
You can press the Pause button, So the system
can resume normal operation.
5
Abnormal
1
If you use this function for the first time, you
should first run setup:
Click "Function Settings" in the lower right
corner and select “A.T.O."-"One key fill up"
and follow the instructions on the screen.
Otherwise, the maximum allowable running
time is one minute
2
3
Step
1. First use the pause button in the APP or
controller to pause the refill function.
2. Take out the old water in the fish tank.
Initialization
One Key Top Up
3. Click the run button on the controller or
the Fill up button in the app.
4. The device will automatically add water to
the location of the probe.
How to connect to the network
1. Search for "Smart life" in the APP
market, then download and install it.
2. Please check the APP icon and make
sure it is consistent with the picture on
the right before downloading.
2
4
Step
Step
3. Please give the APP location permission and
turn on the location function of the phone.
4. Connect your phone to the home network
(2.4G WIFI only, 5G WIFI is not supported)
5. Open the APP and click the +
sign in the upper right corner to
add a device.
6. Choose any WIFI type device,
such as Socket (WIFI)，then
Enter your WIFI password and
click Next.
8. Please click Next, and ignore the prompt
until the APP prompts you choose the flashing
mode of the Led: (fast/slow flashing).
9. Long press the WIFI button on the device for
3 seconds, let go after seeing the indicator
light flashing alternately in red and green.
10.Select the flashing form of the indicator
light on the APP as (fast flashing), and the
device will automatically connect to the
network soon.