Instruction Manual

SETTING DAILY ALRAMS
Move the ALARM switch to the ON position and the LCD displays
the icon. Move the ALARM switch to the OFF position and the
disappears.
While in set mode, press MODE once and the time will switch to
the alarm time display for 5 seconds. Within these 5 seconds,
press and hold MODE for 2 seconds until the hour of the alarm
time starts to flash. Press UP or DOWN to set the desired hour.
Press MODE to confirm your setting and the minutes of the alarm
time display starts to flash. Press UP or DOWN to set the desired
minute. Press MODE to confirm and end setting procedures.
NOTE: After 20 seconds without pressing any buttons, the clock
automatically switches from alarm setting mode to normal clock
mode.
The alarm will sound for 2 minutes if it is not deactivated by
pressing any buttons. In this event, the alarm will be repeated
automatically after 24 hours.
While the alarm is ringing, press any button except SNOOZE to
stop the alarm. It is not necessary to reactivate the alarm. It
automatically sets to the preset alarm time.
While the alarm is ringing press SNOOZE to go into snooze mode.
The alarm will sound again in 8 minutes.
°F |°C TEMPERATURE DISPLAYS
The temperature is displayed either in °F / °C, the weather
station defaults to Celsius. Press the UP button to switch
between Celsius and Fahrenheit.