Manual



Example:
5##%L
5'##%&
5##%'
?!55L
?!55'L
?!55
!("-!5#!3!3-#%
Error Messages
When you turn on the fixture, it will make a reset first. The display may show an error message while
there are problems with one or more channels. The error message stands for the channels equipped
with a testing sensor.
For example, when the display shows “Err channel PAN”, it means there is some error in the
horizontal movement (PAN), control-channel 1. If there are some errors on several channels at the
same time, you may see the error messages flash repeatly for 2 times, and then the fixture will
generate a reset signal, all the stepper motors will reset. If the error messages maintain after
performing reset more than 2 times, only the channels which have errors can not work properly,
others can work as usual.
! -#"   3 --  !   ! G  ! #! #8G
###CD!--8#"C"6?
!5?D !#!#!-!
!%
PAN Static Gobo Prism Rotation
TILT Prism 1 Frost
Color Wheel Prism 2 Focus