User manual

00026265.DOC, Version 1.1

29/56

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

rocedure:

Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply

cable available at your dealer.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply: 230 V AC, 50 Hz ~

Power consumption: 23 W

DMX-control-channels: 5

DMX-512-connection: 3-pin XLR

Sound-control: via built-in microphone

Flash-rate: 18 Hz

Number of LEDs: 40

Dimensions (LxWxH): 380 x 190 x 255 mm

Weight: 3.4 kg

Maximum ambient temperature T

: 45° C

Maximum housing temperature T

(steady state): 55° C

Min.distance from flammable surfaces: 0.5 m

Min.distance to lighted object: 0.1 m

Fuse: F 1 A, 250 V

Accessory:

FUTURELIGHT EX-6/32 controller No. 51834046

FUTURELIGHT CP-240 controller No. 51834265

Wizard-512 USB DMX-Software + Interface No. 51860102

Wizard-1024 USB DMX-Software + Interface No. 51860110

FUTURELIGHT Easy-4 remote control No. 51834014

FUTURELIGHT DES-3 DMX-terminator 3-pin No. 51834001