User's Manual

8M074X01-01 Rev.1
xi
FCC Class A Digital Device or Peripheral - Information to User
ÜÜNOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, can cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
ÜÜ WARNING
Changes or Modifications not expressly approved by Futurecom Systems Group Inc. could void the
user’s authority to operate the equipment.
ÜÜ WARNING
To satisfy FCC/IC RF exposure requirements for transmitting devices, a minimum separation distance
should be maintained between the antenna of this device and anyone in the vicinity of the radiating
element. The following table shows the minimum distance, as per FCC 1.1310 requirement, for selected
values of CMDUHF Tx power settings and antenna / feed cable assembly gains:
Antenna gain [dBi] γ
CMDUHF Tx Power [W]
ι
0 3 6 10 15
1 18 25 35 55 97
5 39 55 77 122 217
10 55 77 109 173 306
20 77 109 173 244 433
35 102 144 204 322 573
43.6 114 161 228 359 639
Table 1. Minimum distance between CMDUHF Tx antenna and general population ( in [cm] ).