User Manual

遠瞻生活科技有限公司 WHDW Manual Guide
Future Life Technology Co., Ltd. 2019/09/03
Page 15 / 37
(4) Coordinate type: mechanical coordinate / workpiece coordinate
(5) Battery level display（If doesn’t connect, it won’t be displayed.）
The device number is displayed on the left side of the second line of the screen,
the current page/total number of pages on the right, and the current axial coordinates in
the middle of the screen. The I/O status of each button of the Wireless Manual Pulse
Generator is displayed below. For example, EMG is the emergency stop button, and
En1 and En2 are the enable buttons. If pressed, it will be highlighted. As shown in Ill
7, the two enable buttons are pressed, and the Wireless Manual Pulse Generator is
currently on the F1 page.
Ill 7：Charging Stand Display Information
Operation Description
Boot up & Connection
(1) When booting, the initial screen will be displayed, including the hardware
and software versions, as shown in Ill 8.
Ill 8：Boot Initial Screen
(2) Wireless Manual Pulse Generator will automatically connect, as shown inIll
9.
Ill 9：Connecting Screen
(3) If the connection to the charging stand is successful, enter the main screen,
that is the F1 page.：