Owner Manual

Jet Water Flow Adjustment
Your Futura Spa features adjustable water flow on specific hydrotherapy jets.
To reduce the flow: grasp the outer flange of the jet, and turn clockwise approximately a 1/4
turn. When it hits the stop, the jet is considered closed, and flow will be restricted.
To increase the flow: from the closed position, turn the jet counter-clockwise approximately
1/4 turn. When it hits the stop, the jet is open, and there is maximum jet flow. Do not attempt
to turn the jet past the stop, as this will unclip the jet internal from the socket. All Futura Spas
are shipped from the factory with the jets in the open position.
Jet Air Flow Adjustment
Your Futura Spa features adjustable air flow on specific hydrotherapy jets.
To reduce the flow: turn the handle on the air control clockwise. When it hits the stop, the air
is closed, and air flow will be restricted.
To increase the flow: turn the handle on the air control counter-clockwise. When it hits the
stop, the air control is fully opened. For maximum operating e$ciency, the air controls must
remain closed when your hot tub is not in use.
Jet Insert Removal & Replacement
To Remove:
Turn the jet counter-clockwise to unclip & pull out of socket.
To Reinstall:
• Push the jet into the socket until it snaps into place, ensuring the square pin on the back of
the jet lines-up with the groove in the socket flange.
Diverter Valve (If Equipped)
This valve, which is located along the top lip of the spa is used to divert the power from
the pump to one of the “Hot Seats” or the other. The valve has a 180° range from one side
to the other. By moving the valve to one side, the pump will deliver all of its power to one
seat. Moving the valve to the other side will shift the power to the other seat. If the valve is
moved to a position anywhere between both sides, the power will be shared between both
sides.
Always: return the valve handle to the middle position before exiting the hot tub to ensure
that there is air and water flow to the ozone jet
Waterfall Control (If Equipped)
If your hot tub has the optional waterfall feature, then you will have a waterfall flow control
valve. The waterfall feature was designed to provide a gentle cascade of water over the neck
and shoulder area. Simply turn the top of the control clockwise for less water flow, and coun-
terclockwise for more water flow.
For maximum operating e$ciency, turn the waterfall o! when the hot tub is not in use.