User Manual
+PUGTV%& (QNNQYUVGRUCPFRTQEGGF
YKVJKPUVCNNCVKQP
6HWWLQJ8S<RXU9&DO
70
Connect power supply
jack.
Connect USB cable.
Connect temperature
probe.
Connect USB cable to
PC.
Ready for power
connection.
Connect AC cable to
power supply.
Connect to AC power. Turn VCal power switch
to ON.
New Hardware Wizard
will guide you with driver
installation.
Device Manager will show you
correctly installed drivers. If “Futek
VCal Device” is not properly
initialized, turn power OFF then ON.
www.futek.com Tel: 1-800-23-FUTEK or 949-465-0900 futek@futek.com
Copyright 2006, Futek Advanced Sensor Technology, Inc.
Doc. No. MKTSFVCA12012006