User Manual

Futek Advanced Sensor Technology – Futek VCal™Documentation Rev. 1.8.0 07/26/05
©Futek Advanced Sensor Technology 2005
23
RS - 232 Channel - This option allows you to access the RS - 232 channel, where you can then connect ASCII devices to your VCal™
system, such as the Futek D502, D506, and D526 . . .
COM - Allows you to designate which communication port you wish to use (COM’s 1 – 16 are available).
Baud - Allows you to designate the baud rate you wish to use (300 – 115200 are available).
Parity - Allows you to choose between Non, Odd, or Even parity checking.
Char – Allows the user to choose between 7 or 8 character.
Stop Bit - Allows you to choose either 1 or 2 as your stop bit.
Handshaking - Allows you to choose between None, XonXoff, RTS, and RTSXonXoff as your handshake method.
Termination Characters - Allows you to define termination characters for strings received from, or transmitted to the device.
RX Data Command - Allows you to define data commands received from the device.
Profile - Allows you to enter and save commonly used profiles, so that they may be easily used later.
Misc. Commands - Allows you to define commonly used commands that are transmitted to the device.