User Manual

9
Cautions when Connecting
Please refer to the figure below for connecting RS301CR/RS302CD and RPU-10.
Fig. 3.3 Operating with RPU-100
Allowable current for relay connectors is 2A and for servo harness is 3A each for continues use.
Set your PC’s communication parameters as follows;
Baud rate ：115.2 bps
（adjustable between 9.6kbps and 460kbps, Refer to Table 4.6 Baud rate in p.19）
Data bit length ：8 bits
Parity ：none
Stop bit ：1 bit
Flow control ：none
RPU-10
PC
Please prepare it by your self
Relay box
RS301CR/RS302CD
RS232C
PR-4S780P