7PX Manual

Home screen

Menu screen Racing menu screen Curve screen

Brake curve

* Tap the type to switch the

curve type.

EXP curve screen

Curve type which operates the

throttle from the neutral point to

the full brake point on a curved

curve.

Curve screen

Curve type which sets 9 points

between the throttle neutral point

and full brake and operates the

throttle.

VTR curve screen

Curve type which sets the switching point

between the throttle neutral point and full

brake point and operates the throttle on a

linear curve.

Normal

+1% ~ +100%

Trigger operation Trigger operation Trigger operation

-1% ~ -100%

Mild Mild

Servo travel

When brake mixing (page 106)

is used, brakes 2 and 3 are dis-

played.

Function

Curve (EXP)

Brake curve

This function makes the throttle brake side direction servo operation quicker or milder. It

has no effect on the servo maximum operation amount. For the selection from among three

kinds of curves (EXP/VTR/Curve) is also possible. If Ratio is set to 100:0 with the trigger

function (page 62), the brake side will not operate. Since the setting method of each curve is

the same as the throttle (forward) side curve, please read page 81 to 82.

Curve (EXP)

The brake EXP, VTR adjustment can be controlled with digital trim DT1 to DT6 or

digital dial DL1 etc. with the dial select function. (page 66)

Dial / Trim Setting