7PX Manual

Home screen

Menu screen

Menu-2

Menu-1

Linkage menu

Switch select

Since there are

multiple pages,

tap the

mark

and move the

page. When you

are done, tap

[Close] to ﬁ nish.

The steering switch and trig-

ger switch are displayed on

the 2nd page.

Function list

See page 71

Function

Switch Select

This function allows selection of the function to be performed by the switches (PS1, PS2,

PS3, PS4, PS5, PS6, steering wheel, throttle trigger) and setting of the direction, etc. of op-

eration.

- The table on page 71 lists the functions that can be assigned to each push switch.

- The push switch PS6 is integrated with the DL1.

- All switches can be made alternating operations (ON/OFF changes each time SW

pressed). (Nor/Alt)

- The ON/OFF direction can be reversed. The reverse select function always starts from

the ON state. However, the steering/ trigger switch is different, depending on the posi-

tion. (Nor/Rev)

(Function setup)

Tap the switch you want to set.

(PS1, PS2, PS3, PS4, PS5, PS6/ steering

wheel, throttle trigger)

The function list appears on the

switch select menu screen. Tap and

select the function you want to use. To

cancel, tap [Close].

Function select dial setup