7PX Manual

Example of installing angle spacerAngle spacer
191
Reference
T7PX / T4PX Large grip (for transmitter)
This handle grip is larger than the standard handle grip.
It is perfect for those with large hands.
Remove and replace the standard handle grip.
Large grip is standard for the US, and normal (smaller) type is an op-
tional part.
Optional Parts
The following parts are available as T7PX options. Purchase them to match your application. For other
optional parts, refer to our catalog or web site. www.futabarc.com.
Transmitter Battery
When purchasing a transmitter battery use the following:
Part name
HT5F1800B (6V/1800mAh) Ni-MH battery
FT2F1700B(6.6V/1700mAh)/2100BV2 (6.6V/2100mAh) Li-Fe battery
Please do not use the transmitter batteries HT5F1800B and FT2F1700/2100BV2 as a receiver battery.
Telemetry sensors
Usable sensor options (As of July 2017)
-Voltage Sensor (SBS-01V) Measures external power supply voltages up to 100V.
-Temperature sensor (SBS-01T) Perfect for engine head, etc.
-Temperature sensor (SBS-01TE) Used by attaching to a motor, etc.
-RPM Sensor (SBS-01RM) Measure the rotation speed over the 0 to 999,900rpm range.
-RPM Sensor (SBS-01RB) Measure the rotation speed over the 360 to 300,000rpm range. (Brushless type)
-Current sensor (SBS-01C) Measures external power supply voltages up to 70V, capacity and consumption
capacity.
-GPS sensor (SBS-01G) Speed and Distance
T7PX / T4PX Angle spacer
This Angle spacer is option part for T7PX. Angle of a steering wheel can be changed.
Refer to the page 28 of this manual for means of attachment.