7PX Manual

188
Reference
Parameter by type of servo for SR mode
When setting SR mode compatible servo to SR mode with S. BUS servo menu, choose from 3 types.
The table below shows the initial setting parameter table by type.
System Compatibility
The 7PX is a 2.4GHz T-FHSS SR and T-FHSS surface system. The transmitter can also be switched to
S-FHSS and FASST. (However, the telemetry system can be used T-FHSS only.) The usable receivers
are shown below.
SR mode compatible servos SR type Frequency Dead band Damper Smoother Stretcher Boost Boost
BLS371SV
Type1
2 0.11 68 INH 4.000
ACT
12
Type2
3 0.11 68 INH 4.000
ACT
14
Type3
4 0.11 64 INH 2.500
ACT
18
BLS471SV
Type1
2 0.11 66 INH 1.250
ACT
20
Type2
3 0.11 58 INH 0.875
ACT
20
Type3
4 0.11 60 INH 1.000
ACT
20
BLS571SV
Type1
2 0.11 48 INH 2.500
ACT
10
Type2
3 0.11 40 INH 2.500
ACT
10
Type3
4 0.11 40 INH 2.500
ACT
20
BLS671SV
Type1
2 0.11 44 INH 4.000
ACT
14
Type2
3 0.11 48 INH 4.000
ACT
20
Type3
4 0.11 40 INH 4.000
ACT
20
S9372SV
S9373SV
Type1
20.1150
ACT
1.500
ACT
10
Type2
30.1182
ACT
1.250
ACT
14
Type3
40.1186
ACT
2.000
ACT
20
O.S.SPEED T-1
Type1
2 0.11 56 INH 2.500
ACT
10
Type2
3 0.11 48 INH 2.000
ACT
10
Type3
4 0.11 48 INH 2.000
ACT
20
O.S.SPEED R-1
Type1
2 0.11 72 INH 3.000
ACT
12
Type2
3 0.11 72 INH 2.500
ACT
12
Type3
4 0.11 80 INH 2.500
ACT
16
O.S.SPEED B-1
Type1
2 0.11 88 INH 2.000
ACT
10
Type2
3 0.11 96 INH 2.000
ACT
10
Type3
4 0.11 96 INH 2.000
ACT
20
Communications System Usable Receivers
T-FHSS SR/T-FHSS (Default) R334SBS
T-FHSS
R304SB/ R304SBE
S-FHSS (Change is possible)
R2104GF/ R204GF-E/ R2008SB/ R2006GS
*The analog servo mode of the S-FHSS system can use up to 7 channels. When using 5 or
more channels, R2008SB and R2006GS can be used.
FASST (Change is possible) R614FS/ R614FF-E/ R604FS/ R604FS-E
*R3008SB, T-FHSS Air system receivers do not operate.