7PX Manual

185

Function

Calibration

(Preparation)

Tap the [Trigger]. The neutral correction screen appears.

(Throttle neutral adjustment)

At neutral, pull the throttle trigger to full throttle and to the

brake position. Press the [Neutral] button while the trigger is

in its neutral position. If the neutral position is OK, the [End

Point] button will appear after pressing the [Neutral] button. If

not within the correction range, the [End Point] button will not

appear. If not within the correction range, the end point correc-

tion screen will not appear.

(Throttle trigger travel adjustment)

With [End Point], pull the throttle trigger to full throttle and

back for braking, tap the [End Point] button. If the [End Point]

correction is OK, the display will return to the calibration

screen. If not within the correction range, the display will not

return to the adjuster screen. In this case, return to the system

menu by pressing the HOME button. When operation cannot

be ended normally even when correction is repeated, and

cannot be ended normally, contact the Futaba Service Center.

Throttle adjustment

When ﬁnished, return to the System menu screen by pressing the HOME button.