7PX Manual

153
Function
Telemetry
It is necessary to set telemetry to the on position when setting to TFHSS. Telemetry is not
used in TFHSS-SR mode. to use the telemetry function. (page 52) This screen displays and
sets the various information from the receiver. An alarm and vibration can be generated de-
pending on the information. The alarm and the vibration are set by each information screen.
For example, a drop in the voltage of the receiver battery housed in the model car can be
reported by an alarm. The telemetry data received last is memorized. Therefore, even if
the receiver power is turned off, information display, audio guide, and alarms remain until
the transmitter power is turned off. The speech function can be turned on and off with the
VSHFL¿HGVZLWFK6HHWKHVZLWFKVHOHFWIXQFWLRQSDJH
Telemetry
Home screen
Menu screen Accessory menu screen
Telemetry
Receiver-Voltage display
Temperature display
EXT-Voltage display
Speed display
EXT-Current display
RPM display
Telemetry function ON
(Preparation)
The sensor used is connected with the receiver referring to the connection diagram of page 152.
1
(Function ON/OFF)
Tap telemetry (ON) or (OFF) to select ON / OFF.
"OFF" :Telemetry function OFF
"ON" :Telemetry function ON
Using Telemetry function
2
When fi nished, return to the Linkage menu screen by press-
ing the HOME button.