4PX Transmitter Manual
or
MENU 1 screen
HOME
screen
MENU 2
screen
Pres
s
Pres
s
Pres
s
1 SPEED
A delay is set over the entire
throttle range.
2 SPEED
A delay can be set in 2 ranges
with Point1 as the boundary.
3 SPEED
A delay can be set in 3 ranges with
Point1 and Point2 as the boundaries.
Point1
high
neutral
high
neutral
high
neutral
Point2
Point1
ALL
Low
High
Low
High
Middle
-Throttle servo (ESC) operation is delayed so that the drive wheels will not spin even if
the trottle trigger is operated more than necessary. This delay function is not performed
when the throttle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
Operation
Mode selection
One speed, 2 speed, or 3 speed can be selected at the "Mode"
item. The setting item (screen) depends on the mode. The figure at
the above is the 3 speed setup screen.
Pre
Pres
s
Pre
Pres
s
Pres
s
63
Function
With "Throttle speed":
Quick start without skidding
Without "Throttle speed":
Slow start due to skidding
Throttle Speed
Throttle Speed
(Throttle system)
Sudden throttle trigger operation on a slippery road only causes the wheels to spin and the
vehicle cannot accelerate smoothly. Setting the throttle speed function reduces wasteful bat
-
tery consumption while at the same time permitting smooth, enjoyable operation.