4PX Transmitter Manual

MENU 1 screen

HOME

screen

MENU 2

screen

Pres

+1% ~ +100%

-1% ~ -100%

Wheel operation

Mild

(Negative side)

Quick

(Positive side)

Wheel operation

Servo travel

Vertical cursor moves in step

with steering wheel operation.

When you want to quicken steering operation, use the (+)

button to adjust the + side. When you want to make steer-

ing operation milder, use the (-) button to adjust the - side.

Steering EXP adjustment

The steering EXP adjustment can be controlled with digital trim DT1~DT6 or digital

dial DL1 etc. with the function select dial function. (p.101)

Dial / Trim Setting

Adjustment buttons

Adjust with the (+) and (-) buttons.

- Return to the initial value "0" by pressing the (+) and (-)

buttons simultaneously for about 1 second.

Adjustment range

-100~0~+100%

Setup item

Rate: Steering EXP rate

When the setting item "Quick or mild" is selected and the

(JOG) button is pressed when the rate is other than "0",

quick/mild are reversed.

When ending setting, return to the curve screen by pressing the (END) button.

Function

Steering curve (EXP)

(Steering system)

This function is used to change the sensitivity of the steering servo around the neutral posi-

tion. It has no effect on the maximum servo travel.

When the setting is not determined, or the characteristics of the model are unknown,

start with 0%. (When EXP is set to 0%, servo movement is linear.)

Racers Tip

Pre

Pres