4PX How To - Adjust Dual Rates

TRUST
futaba-rc.com
Futaba, distributed by Hobbico.
®
Press and hold PS5, it will switch between normal
condition and 2nd condition showing 60% and 100%
From the home screen go to 2 of 2 in the menu. Move the
cursor or jog dial to the “D/R, ATL” and press the jog dial.
Dual Rate will show 100%. By pressing the minus button,
reduce the number to 60%
At the Home screen, you will see at the bottom right section a “D/R” the percentages will change
and the Ch1 bar on the front page change as you press the PS5 switch. You can also go into the
“Servo View” and while turning the steering wheel all the way to the left or right and press the
PS5 switch, you will see the steering switch from the normal condition to the 2nd condition.
Hit the end button twice to go back to the home screen. You will see a green square
with “1” at the top of the right side of the screen. When pressing the PS5 button, it will
change from normal condition to 2nd condition, an orange square with “2”.
Dual Rate
Now we need to adjust our Dual Rates. For normal condition and this
example, we will use 60% for the normal and 100% for the 2nd condition.