4PX How To - Adjust Dual Rates

First, go to page 2 of 2 in the menu settings by

moving the jog dial left or right. Select “Condition”

Press the plus or minus buttons to turn the

condition on.

Condition: Commonly used in Oval Racing

Example: When setting the normal dual rate steering, say 60% at left and right. By pressing or holding a switch you can activate

a 2nd condition where you can have more steering, say 100% in case you get into a complicated situation. By tapping or holding

this switch, it will override the normal conditions until the switch is either released or pressed again to switch back.

Select either “Copy 1st to 2nd” or 2nd to 1st” this will depend on what

condition you prefer to activate. In this case, we will select “Copy 1st to

2nd” Use the jog dial to highlight “Copy 1st to 2nd” Press jog dial and you

will get a “Are you Sure?” question. Select “Yes” and press the jog dial.

Press the “End’ button to go to the home page.

Programming Dual Rates (Normal Condition to 2nd Condition)

While setting up the condition you will need to program each model separately.

The conditions don’t transfer from model to model.

Switch Select

Move your cursor or jog dial to “SW Select” Press the jog dial and it will take you to a list

of PS 1-5 and a TS switches.

To determine where the switches or dials are on the transmitter, please refer to the 4PX

manual on page 15. Any digital trim or push button can be assigned to the Dual Rate

2nd Condition.

Using the jog dial, scroll up or down to “PS5”. We will use this switch for the 2nd

condition. Press the jog dial and scroll down to “Condition 2” and press the jog dial.

This will show the PS5 switch is now connected to the 2nd condition. By moving

the cursor to the right, you can select if you want the 2nd condition to be normal or

reversed. In this case, we will leave in the normal condition. Under “Type”, you can

select to have PS5 when pressed to act as a normal on/off switch or alternative switch

where when PS5 is pressed to go to the 2nd condition it will stay in the 2nd condition till

the PS5 is pressed again to go back to the normal condition.

How to

PAGE 1
How to ® Programming Dual Rates (Normal Condition to 2nd Condition) While setting up the condition you will need to program each model separately. The conditions don’t transfer from model to model. Condition: Commonly used in Oval Racing Example: When setting the normal dual rate steering, say 60% at left and right. By pressing or holding a switch you can activate a 2nd condition where you can have more steering, say 100% in case you get into a complicated situation.
PAGE 2
Hit the end button twice to go back to the home screen. You will see a green square with “1” at the top of the right side of the screen. When pressing the PS5 button, it will change from normal condition to 2nd condition, an orange square with “2”. Dual Rate Now we need to adjust our Dual Rates. For normal condition and this example, we will use 60% for the normal and 100% for the 2nd condition. From the home screen go to 2 of 2 in the menu.