10PX Transmitter - Manual

99
Returntotableofcontents
1
Tap the travel button of the [Brake rate
(ATL)]. Value input buttons appear on the
screen and use the [+] and [-] buttons to
adjust the brake rate amount.
This brake rate servo travel is linked to the grip trim.
When finished, return to the Linkage menu
screen by pressing the HOME button.
2
Tap the travel button of the [Throttle
rate]. Value input buttons appear on the
screen and use the [+] and [-] buttons
to adjust the throttle rate amount.
When finished, return to the Linkage
menu screen by pressing the HOME
button.
Brake rate (ATL) adjustment
Throttle rate adjustment
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Brake rate(ATL)
0~100
Initial value: 0
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Throttle rate
0~100
Initial value: 100
LINKAGE MENU
Setting
- Tap (ON)/(OFF).
1
(Throttle rate Function ON/OFF)
Tap mode (ON) or (OFF) to select ON/OFF.
"OFF": Function OFF
"ON": Function ON
*Shows the ON/OFF state