10PX Transmitter - Manual

98
Returntotableofcontents
D/R, ATL
D/R (Steering dual rate)
The steering left and right servo travels are adjusted simultaneously. This setting is linked
to transmitter grip trim DT5. When DT5 is assigned another function, the dual rate can be
adjusted with this screen.
ATL (Brake 1 rate)
7KLVIXQFWLRQGHFUHDVHVWKHVHWYDOXHZKHQWKHEUDNLQJH൵HFWLVVWURQJDQGLQFUHDVHVWKHVHW
value when the braking force is weak. This function is linked to transmitter grip trim DT6.
When DT6 is assigned another function, this function can be set with this screen.
Throttle rate
Even if the throttle trigger is set to full speed, the amount of throttle movement can be
adjusted so that it does not reach full throttle.
- By assigning the [Throttle rate] function on the switch setting screen, you can switch the function ON / OFF
according to the situation.
- Throttle rate can be adjusted with the dial DL1 and digital trim DT1 to DT6 in the [trim / dial settings].
1
Tap the travel button of the [Dual rate].
Value input buttons appear on the screen
and use the [+] and [-] buttons to adjust the
dual rate amount.
This dual rate of servo travel is linked to the grip trim.
When finished, return to the Linkage menu
screen by pressing the HOME button.
Dual rate adjustment
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Dual rate
0~100
Initial value: 0
LINKAGE MENU
Home screen Menu screen
Menu-1 Menu-2
D/R, ATL
Linkage menu screen