10PX Transmitter - Manual

91
Returntotableofcontents
Abbreviation used on
the setup screen
Function name, etc
Channel 3 to 7 control
Operation of channel 3 to 7 (Channel 5 to 7 is for S-
FHSS analog system only.)
Condition 1 2 Change between condition 1 and 2
Condition (1-5) Specify one of conditions 1 to 4
Program mixing (1-5) Program mixing (1-5) function ON/OFF
A.B.S. (Brake 1) A.B.S function brake 1 (2 channel) ON/OFF
A.B.S. (Brake 2,3)
A.B.S function brake 2,3 (Auxiliary channel) ON/
OFF
Traction control Traction control function ON/OFF
4WS mixing 4WS mixing function ON/OFF & type select
4WS type1 (Front) 4WS mixing function type1 (Front) select
4WS type2 (Reverse) 4WS mixing function type2 (Reverse) select
4WS type3 (Same) 4WS mixing function type3 (Same) select
4WS type4 (Rear) 4WS mixing function type4 (Rear) select
Dual ESC (Rear) Dual ESC mixing (Rear Drive mode)
Dual ESC (4WD) Dual ESC mixing (4WD mode)
Dual ESC (Front) Dual ESC mixing (Front Drive mode)
Gyro mixing Switching GYRO mode function ON/OFF
Gyro gain
Switching GYRO mode (Switch of Gain1 and Gain2
in the same group)
Gyro group Switching GYRO mode (Switch of Gain group)
CPS mixing (1-3) CPS up function ON/OFF
Brake Steering mixing (Brake function ON/OFF)
Start Start function trigger wait ON/OFF
Engine cut Engine cut function ON/OFF
Idle up Idle up function ON/OFF
Neutral brake Neutral brake function ON/OFF
Timer start Timer function start/stop
Timer reset Timer function reset
Telemetry speech Telemetry voice guide ON/OFF
Telemetry log Telemetry data logging ON/OFF
Screen capture
Save images of the currently displayed screen to
microSD card.
Backlight LCD backlight ON
OFF Not used
Push switch
：
SW1
-
SW7
Slide switch
：
SSW1
Paddle switch
：
PD1 PD2
Steering switch
：
SS
Trigger switch
：
TS
Set table functions
Neutral brake ON/OFF is indi-
cated on the home screen for
a few seconds.
The HOME screen display
When the push switch is operated, the state
of the function is displayed for a few sec-
onds at the top of the screen.
Example:
When the push switch to which ON/OFF of the neutral
brake is assigned is operated.
LINKAGE MENU
PD1PD2 SW5SW3
SW1
SW2
SSW1
SW4
SW6
SW7