10PX Transmitter - Manual

78
Returntotableofcontents
The number of channels
varies depending on the
selected system.
Tap to change page.
90deg
Use this function to adjust the neutral position of the steering, throttle, channel 3, chan-
QHODQGDX[LOLDU\FKDQQHOVVHUYRV
(Preparation)
- Follow the instructions of the model, install the servo horn, and
make the next adjustment.
- Set the steering and throttle digital trims to the neutral "0" posi-
tion. Set auxiliary channels to the center "0" position.
- Tap the trim display part of the channel you want to adjust.
Value input buttons appear on the Sub-trim menu screen.
1
(Sub trim adjustment)
Use the [+] or [-] button to adjust the center.
(Each channel can be set similarly.)
Sub trim adjustment
*Sub trim adjusts the entire range of the
servo in the set direction.
Sub Trim
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Sub trim
-100~+100
Initial value: 0
2
When finished, return to the Linkage menu screen by pressing the HOME
button.
LINKAGE MENU
Home screen Menu screen
Menu-1 Menu-2
Sub trim
Linkage menu screen