10PX Transmitter - Manual

77
Returntotableofcontents
LINKAGE MENU
Setting
- Tap (R)/(N).
(N) Normal/(R) Reverse
The number of channels
varies depending on the
selected system.
Tap to change page.
However, when the position set by trim or sub trim shifts
from the center, the center becomes the opposite side.
Channel Reverse
This function reverses the direction of operation of the servos related to transmitter
steering, throttle, channel 3-10 channels operation.
1
(Servo reverse setting)
Tap the desired channels setting button to
choose the proper direction for the servo.
(Each channel can be set similarly.)
Servo Reverse Function Setting
2
When finished, return to the Linkage menu screen by pressing the HOME button.
Home screen Menu screen
Menu-1 Menu-2
Channel reverse
Linkage menu screen