10PX Transmitter - Manual

75
Returntotableofcontents
LINKAGE MENU
Home screen Menu screen
Menu-1 Menu-2
Throttle mode (Trigger)
Linkage menu screen
Forward 50: Brake 50 Forward 60: Brake 40 Forward 70: Brake 30 Forward 100: Brake 0
60 : 4050 : 50
70 : 30 100 : 0
Ratio mode
Forward 50:Brake 50
Forward 60:Brake 40
Forward 70:Brake 30
Forward 100:Brake 0
Throttle Mode (Trigger)
This menu has the following two functions:
-Servo neutral mode:
This function allows the selection of the forward side and brake (reverse) side opera-
tion ratio from 70:30, 60:40, 50:50, or 100:0 by changing the neutral position of the
throttle servo.
-Neutral brake:
To use the
"
Neutral brake
"
function, switch set by the
"
Switch select
"
function (Linkage
menu) is necessary. The neutral brake, which applies the brakes at the neutral posi-
tion of the throttle trigger, can be set. However, when using the MC950CR, MC851C,
MC602C, MC402CR, or other Futaba ESC, confirm that the ESC is in the neutral
position and the set is in the operation mode before setting the neutral brake function
switch to ON.
Throttle servo neutral position "Ratio"
1
(Throttle mode selection)
- Tap the [Ratio] part.
The mode list appears on the Throttle mode (Trigger)
menu screen.
Tap from the list and select the mode. To cancel, tap
[Cancel].
Selecting the trigger ratio
2
When finished, return to the Linkage menu screen by pressing the HOME button.