10PX Transmitter - Manual

71
Returntotableofcontents
Receiver
Tap the Ch.1(Steering ) Tap the SR mode
2
For the F-4G system, tapped [Analog Servo] [Digital Servo] [SR mode] in the receiver
setting "Response" and make changes. SR mode require their own dedicated servos.
The display changes when the mode is changed.
When using normal servo or ESC, set the Digital servo or Analog servo.
Note:
In SR mode ON, normal servo, ESC, and standard gyro will not operate.
When using SR
servo for steering
Turn it ON for SR. Tap Yes.
Restart the Receiver.
When using SR
servo for steering
*
In the case of T-FHSS SR, select ON / OFF of SR mode in the response.
3
When using battery fail-safe, set the Battery Fail-safe Voltage in the "Fail-safe" in the
"Linkage menu".
*In the F-4G system, the Battery Fail-safe voltage is set at the time of linking. Relink when
changing Battery Fail-safe voltage.
4
Bring the transmitter and receiver within 50 cm of each other (antennas do not touch)
and turn on the receiver power.
5
Touch [Link] on the transmitter T10PX screen, you will hear a chime sound and T10PX
will enter the link mode for 20 seconds.
LINKAGE MENU
"Please link the receiver."
is display