10PX Transmitter - Manual

70
Returntotableofcontents
This menu selects the settings matched to the receiver system used and the type of ser-
vo and the items selected at the T10PX, linking of the T10PX with the T-FHSS telem-
etry system, and ON/OFF.
Receiver
HOME Menu Linkage menu Receiver
Receiver system Change & How To Link
)LUVWVHWXSWKHUHFHLYHU6HWWLQJFKDQJHVDUHLPPHGLDWHO\UHÀHFWHG1H[WWKHWUDQV-
mitter and receiver are linked and the receiver memorizes the transmitter ID num-
ber so that signals from other transmitters will not be received.
In addition, with the Telemetry system, the transmitter simultaneously memorizes
the receiver ID numbers so that data from other receivers will not be received.
The method of setting up the receiver system and the method of linking the trans-
mitter and receiver are described.
* Even with the same receiver, if you change
the system, be sure to link with the receiver
and power cycle the receiver.
Tap the system to be set from F-4G, T-
FHSS SR, T-FHSS, S-FHSS or Mini-Z.
1
In "Receiver", select and tap the
system to be set from systems.
The confirmation screen will be
displayed. To execute, tap [Yes] to
hear an electronic sound and finish
setting. To cancel, select [No] and
touch it. If you change the system,
be sure to link it with the receiver
and turn the power on again.
LINKAGE MENU