10PX Transmitter - Manual

68
Returntotableofcontents
MODELMENU
Reset execution
Tap the [reset type]
Reset type
-Model data
-User menu
-Telemetry
-All data
This function resets the contents of the currently called model memory.
The reset method can be selected from among the four types described below. These
resets do not initialize the calibration function and system function.
-Model data
This mode is Initializes only the function setting data. The direct menu function is
not initialized.
-User menu
This mode is Initializes the user menu function. Other settings are not initialized.
-Telemetr y
Telemetry related setup data is initialized.
-All data
This mode is Initializes the direct selection function, receiver setting function, and
the setting data of each function.
Data Reset
1
(Execution of reset)
Select the type you want to reset and tap. A
confirmation message will be displayed as
"Are you sure?" If you want to execute, tap [Yes]
to execute. Reset is now complete.
2
When finished, return to the Model menu screen by pressing the HOME button.
Data Reset
Home screen Menu screen Model menu screen
Date reset