10PX Transmitter - Manual

66
Returntotableofcontents
MODELMENU
Select/determine character
Select a character, tap it to de-
termine the character
Name cursor movement
Use the [
]/[ ] tap to move the
cursor. Also, when you decide
a character, when the cursor
position of the model name
moves to the right, the cursor
position of the model name
moves to the right.
This function allows you to assign a name up to ten characters, to each model memory.
Model Name
Move cursor
Deletion and cancellation of
characters (Undo)
Tap to select characters
Selection of alphabet/number/"kana"
1
(Moving the cursor to the character you want to change.)
In the model name, tap [ ], [ ] to move the cursor and
select the character of the model name you want to set or
change. A vertical line cursor is displayed before the selected
character.
2
(Selection of characters to use)
Select the character to use from the list. When you decide
the character to use, tap it. The character is determined, and
the character string of the model name moves to the right. If
you tap [BS], the left character of the vertical line cursor de-
leted. To redo, tap [Undo].
3
When finished, return to the Model menu screen by pressing
the HOME button.
Setting the model name and user name
Home screen Menu screen Model menu screen
Model name