10PX Transmitter - Manual

47
Returntotableofcontents
Caution
Always insert and remove the microSD card in the state
in which the transmitter power is off.
If the microSD card is removed while being accessed (read or write), the
card itself and the data may be destroyed.
Do not install and remove the microSD card with the mi-
croSD card slot facing your face.
If you remove your fingers quickly, the microSD card may fly out and strike
your face and is dangerous.
Since the microSD card is a precision device, do not
subject it to unreasonable force or shock.
(Commercial product)
SD standard and SDHC standard microSD cards
SD/SDHC format. Maximum size 32MB. SDXC format is not
supported.
*The data in the memory card cannot be guaranteed re-
gardless of the contents and cause of trouble or damage.
Always back-up the valuable data in the memory card.
(Some models may not be operated by card.)
Handling a microSD card (commercial product)
T10PX model data and telemetry log data can be saved by using a commercial mi-
croSD card. When T10PX software updates are released, the microSD card can also
be used to make the update.
-When a microSD card is installed in the T10PX trans-
mitter, a folder called
"
Futaba
"
is created. Folders called
"
LOG
"
,
"
MODEL
"
and
"
PICTURE
"
are created in this
folder. The
"
MODEL
"
folder stores the model data and
the
"
LOG
"
folder stores the telemetry log data. When
"
Save screen
"
is set at the push switch by switch select,
an image of the screen to be displayed on the T10PX is saved by that switch. The saved im-
age is stored in a folder called
"
PICTURE
"
. Save the images used in the
"
Home Screen
"
function in this
"
PICTURE
"
folder.
-The telemetry log data recorded on the microSD card can be converted to CSV format by
WKHWHOHPHWU\ORJFRQYHUWHUUHOHDVHGRQRXUKRPHSDJH:KHQFRS\LQJRUPRYLQJDORJ¿OH
always select both
"
.FLI
"
and
"
)/'¿OH
"
.
Insert the card with the metal termi-
nals side at the bottom.
Remove the card by pushing it in
and then pulling it out.
Install and remove the card by push-
ing it in until you hear a click.
Turn the antenna and open
the rubber cover
Be sure to close the rubber cover
before returning the antenna.