10PX Transmitter - Manual

212
Return to table of contents
Optional Parts
The following parts are available as T10PX options. Purchase them to match your application. For other optional
parts, refer to our catalog or web site. http:www.rc.futaba.co.jp
Transmitter Battery
When purchasing a transmitter battery use the following:
Part name
LT2F2000B (7.4 V/2000 mAh) LiPo battery
HT5F1800B (6 V/1800 mAh) NiMH battery
FT2F1100B (6.6 V/1100 mAh)/FT2F1700BV2 (6.6 V/1700 mAh)/2100BV2 (6.6 V/2100 mAh) LiFe battery
Do not use the transmitter batteries as the receiver’s battery.
Since the transmitter's battery has an overload protection circuit, the output power will be shut down when the high
current load is applied. This may result in runaway or fatal crash.
Telemetry sensors
Usable sensor options (As of 2021)
-Voltage Sensor (SBS-01V) Measures external power supply voltages up to 100 V.
-Temperature sensor (SBS-01T) Perfect for engine head, etc.
-Temperature sensor (SBS-01TE) Used by attaching to a motor, etc.
-RPM Sensor (SBS-01RM) Measure the rotation speed over the 0 to 999,900 rpm range.
-RPM Sensor (SBS-01RB) Measure the rotation speed over the 360 to 300,000 rpm range. (Brushless type)
-Current sensor (SBS-01C) Measures external power supply voltages up to 70 V, capacity and consumption capacity.
-GPS sensor (SBS-01G/02G) Speed and Distance
Example of installing angle spacerAngle spacer
Angle spacer (10 deg)
The 10 degree angle spacer is available as an option.
Example of installing APA : LAPA wheel position o󱐯set adapter : L
APA wheel position offset adapter
: L
Optional L type that is longer than the attached APA M,S.