10PX Transmitter - Manual

152
Returntotableofcontents
MIXINGMENU
(Preparation)
-Tap the curve type and select [EXP].
1
Tap the value button of the [EXP rate].
Value input buttons appear on the screen.
When you want to quicken steering opera-
tion, use the [+] button to adjust the + side.
When you want to make steering opera-
tion milder, use the [-] button to adjust the -
side.
If you tap "Quick" or "Mild" when the value
is other than "0", Quick/Mild is reversed.
To set the right and left steering curves separately, tap the
rate in the direction you wish to change the setting. Value in-
put buttons appear on the screen, use the [+] or [-] buttons to
adjust the steering curve.
EXP adjustment
2
When finished, return to the Mixing menu screen by pressing the HOME button twice.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Curve rate
-100~+100
Initial value: 0
(Preparation)
-Tap the curve type and select [VTR].
1
Tap the value button of the [VTR rate].
Value input buttons appear on the screen.
When you want to quicken steering opera-
tion, use the [+] button to adjust the + side.
When you want to make steering opera-
tion milder, use the [-] button to adjust the -
side.
If you tap "Quick" or "Mild" when the value
is other than "0", Quick/Mild is reversed.
To set the right and left steering curves
separately, tap the rate in the direction you wish to change
the setting. Value input buttons appear on the screen, use
the [+] or [-] buttons to adjust the steering curve.
2
Curve switching point adjustment
Tap the value button of the [Point]. Value input buttons ap-
pear on the screen, use the [+] or [-] buttons to move to the
point you want to set.
VTR adjustment
3
When finished, return to the Mixing menu screen by pressing the HOME button twice.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Curve rate
-100~+100
Initial value: 0
Point
1~99
Initial value: 50