10PX Transmitter - Manual

Table Of Contents

Returntotableofcontents

Trim/dial lock display mark

Trim/Dial Lock

T10PX setup and operation by digital trim DT1, DT2, DT3, DT4, DT5 and DT6 and

dials DL1 can be prohibited.

Setting

When the HOME button is pressed for about 1 second at the initial screen, a confirma-

tion beep is generated and the trim/dial lock display mark appears on the screen.

Clearing

Edit button lock and trim/dial lock can be cleared in the initial screen state by the same

method as the setting described above. (The trim/dial lock display disappears from the

screen.)

Mechanical ATL

adjusting screw

Adjustment

Using a hex wrench, adjust the trigger brake

(reverse) stroke. (The screw moves the throt-

tle trigger stopper.)

• Adjust the stroke while watching the screw.

Note:

Mechanical ATL Adjustment

Make this adjustment when you want to decrease the stroke of the brake (back) side

of the throttle trigger for operation feel.

Once you have changed the mechanical stroke on the brake side, be sure to adjust

the scale of the throttle channel accordingly by using the

Calibration Function

Due to this change, you also need to adjust in most cases the travel of the throttle

servo by using

Data Setting.