10PX Transmitter - Manual

135
Returntotableofcontents
5
(Steering mixing)
Use this function when you want to soften the
brakes when the steering is operated.
Tap the value button of the "Brake 1 or 2,3"
[Left]. Value input buttons appear on the
screen. Use the [+] and [-] buttons to adjust
the brake amount.
Tap the value button of the "Brake 1 or
2,3"[Right]. Value input buttons appear on the
screen. use the [+] and [-] buttons to adjust
the brake amount. The smaller the value, the
weaker the front brakes. Set value
"
100" is
the state in which steering mixing is not per-
formed.
- The mixing amount can be adjusted in a range from 0 to
100.
6
When finished, return to the Mixing menu screen by pressing the HOME button twice.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Brake rate (Mixing)
0~100
Initial value: 100
The trim/dial select function can control the brake 1,2,3 rate, delay amount, and
EXP setting using the digital dial or digital trim. (Linkage menu)
Trim/Dial Setting
MIXINGMENU