10PX Transmitter - Manual

125
Returntotableofcontents
2
("Trigger point" setup)
Tap the value button of the [Trigger point].
Value input buttons appear on the screen.
Use the [+] and [-] buttons to adjust the op-
eration point.
3
("Preset position" setup)
Tap the value button of the [Preset]. Value
input buttons appear on the screen. Use the
[+] and [-] buttons to set the preset position
of the throttle servo.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Trigger point
5~95
Initial value: 30
Restart
Tap [OFF] to [Ready]
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Preset position
0~100
Initial value: 0
4
("Ready" setting)
To set "Ready" again, Tap [OFF] of "Sta-
tus", the display will change to [Ready] and
wait for trigger operation. Also, you can set
the switch to be in the [Ready] state in the
switch select function (Linkage menu).
5
When finished, return to the Racing menu screen by pressing the HOME button.
In the [Ready] state, if the throttle trigger is operated to the position of the trigger
position, the throttle servo moves to the servo operation position set with preset. It
is canceled when the throttle trigger is returned.
RACING MENU