10PX Transmitter - Manual

124
Returntotableofcontents
* The status display changes to
[Active] or [Ready].
Home screen Menu screen Racing menu screen Start
Start
If the track is slippery and you begin to accelerate by pushing the trigger to full throt-
tle, the car wheels will spin, and the car will not accelerate smoothly. When the Start
function is activated, merely operating the throttle trigger slowly causes the throttle
servo to automatically switch from the set throttle position to a preset point so that the
tires do not lose their grip and the car accelerates smoothly.
- When the throttle trigger is moved to the preset position (trigger point), the throttle
servo moves to the preset position.
- When the throttle trigger is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
7KLVIXQFWLRQLVH൵HFWLYHRQO\IRUWKH¿UVWWKURWWOHWULJJHURSHUDWLRQ DW VWDUWLQJ
This function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically
deactivated, and the set returns to normal throttle trigger operation.
Operation
With the "Start" function
Tires grip the track firmly- Car accelerates
1
(Function ON/OFF)
Tap "Mode" (ON) or (OFF) to select ON/OFF.
"OFF": Start function OFF
"ON": Start function ON
The status display changes to [Ready] or
[Active].
To enable the [Active] status with the switch,
set the "Start switch" with the switch select
function (Linkage menu).
Start function adjustment
Setting
- Tap (ON)/(OFF).
RACING MENU
Without the "Start" function
Wheels spin- Car does not accelerate