10PX Transmitter - Manual

115
Returntotableofcontents
Home screen
Menu screen Racing menu screen Traction control
Traction control ON/OFF is indi-
cated on the home screen for a
few seconds.
It is displayed in the home screen.
When the traction control is ON.
Cycle speed
Duty ratio: X and Y ratio
Y:
(Throttle return time)
Throttle
return
Servo travel
Trigger operation
Trigger point
X: (Throttle application time)
Traction control
Traction Control
Trigger operation with cornering on a slippery road surface is hard to get traction, and
smooth cornering cannot be done. By intermittently operating the operation of the
throttle, you can smoothly navigate and travel on topological lines. Also, with a drift
car, by intermittently operating the motor in the high point direction, a pseudo revving
engine sound can be reproduced.
-During throttle operation, the throttle servo is intermittently operated in the for-
ward direction.
-You can set the amount of return to the slow side, the amount of delay, the speed of
pumping, the operating point, and the duty ratio of pumping.
-You can choose the action on the slow side near the neutral and the action on the
high point side.
Operation
- Mode : Function ON/OFF
Traction control function ON/OFF
setting. When using the Traction
control function, set to
"
ON
"
.
- Throttle return
Set the ratio at which the servo re-
turns to the slow side with respect
to the trigger operation. If set to
0%, the traction control function
will not work. At 50%, it returns to
the neutral position at 50% (half),
100% of t he t r ig ger op e r at ion
amount.
RACING MENU